Jump to content
Ultimaker Community of 3D Printing Experts
mehony85

Cura inverted raised perimeter

Recommended Posts

I modeled up a print using onshape.   the print is a  profile of a car with the outer edge being extruded up 1mm tall and having a thickness of .8mm.   When i bring the model into Cura and look at it in solid mode the model looks like it did in CAD.   when i slice the file it inverts so the recessed center area is now 1mm tall and there is a step on the outer edge that is the inverse of the raised perimeter.   I dont have the print handy but I will update with pictures of the print when I get home tonight 

image.png

Share this post


Link to post
Share on other sites

Look at the part in cura "xray" view mode.  If anything is red than it's a problem and you need to fix your model to make it manifold.  netfabb has a free service for this: https://service.netfabb.com/login.php

 

Also normally if your nozzle is about 0.4mm then cura wont' slice anything at 0.8mm or thinner so experiment by setting line width a bit smaller to see if that helps your issue.  Also you could try the "print thin walls" option in cura.

 

If none of that helps then we need to see what your model looks like in slice view because I didn't understand the "recessed" description.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 130 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!