Jump to content
Ultimaker Community of 3D Printing Experts

Baby Groot Print Quality Issues


Recommended Posts

Posted · Baby Groot Print Quality Issues

Hi All

 

I am having some strange issues when trying to print Baby Groot where anything with a slight overhang seems to have serious quality degradation. This was printed using Ultimaker Pearl White PLA with the default settings in Cura (Temp: 205c, Build Plate: 60c, 0.1mm Layer Height, Flow: 100%).

 

Any help would be appreciated as I am seeing similar issues on other prints with simple overhangs that the printer should be able to handle. I have also had issues with printing the Tolerance Test from Makers Muse where I could not move any of the tests. I had printed that without a raft so retrying it with a raft. 

 

Thanks

IMG_20180319_105509.jpg

MVIMG_20180319_105544.jpg

MVIMG_20180319_105551.jpg

MVIMG_20180319_105607.jpg

MVIMG_20180319_105620.jpg

MVIMG_20180319_105559.jpg

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...