Jump to content
Ultimaker Community of 3D Printing Experts
  • Sign Up
qionquest

Cura: Infill direction at 100% infill

Recommended Posts

Posted · Cura: Infill direction at 100% infill

Hello,

 

I am trying to print a part while setting a 100% infill and a chosen line direction for the infill ([0,90]).

Cura won't generate a Gcode with the chosen infill direction if the infill is set at 100%, but will do it for any other lower infill percentage.

It seems that when choosing a 100% infill, the line direction cannot be chosen...

 

Any tips on how to solve this ?

 

Thanks,

 

 

Share this post


Link to post
Share on other sites
Posted · Cura: Infill direction at 100% infill

Use 99.99% infill. Or 100.01.

Or check the number of top/bottom layers and set them back to a sane amount.

 

When setting infill to 100%, Cura prints everything as a bottom layer (or top, I cannot remember).

Share this post


Link to post
Share on other sites
Posted · Cura: Infill direction at 100% infill

Thanks for the tip, it's good to know that Cura will print everything as the bottom or top layer !

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...