Having print speed issues Cura 3.2.0

[Wes 0]

Hi, new to the forum so if this is in the wrong area please let me know.

The attached is a small head of a fishing lure. I am having issues with printing thru Ultimaker Cura 3.2.0.

When I print with Cura.

1. It gives me a time of 28 minutes to complete, however it takes closer to 44 minutes.

2. Exporting the gcode to an SD card and printing , lets me print it in under 20 minutes.

3. there is a pause at 23mm high(to load weight into the body), doesn't work in Cura, works from the SD card.

This is currently being printed in PETG with a 0.4 nozzle.

Am I missing a setting in Cura or have I got a setting/s wrong somewhere?

Is this another issue do you think?

DFDMP_BibPopper.gcode

BibPopper.stl

[peggyb 169]

the pause is visible in Cura when you load the gcode back in (it is not visible when the stl is loaded)

at 1. you mean printing over usb? instead of 2. printing by sd card?

 

[Wes 0]

Sorry for the delay. i have been away working.

Printing via USB via Cura is the issue, the pause doesn't work and the time is roughly double plus.