Jump to content
NozzleMover

Wall thickness calculated wrong

Recommended Posts

Posted · Wall thickness calculated wrong

Somhow the numbers do not match:

line width= 0.4

wall count=3

wall thickness =0.7???

The thickness is graied out and does not seem to change when changing wall count or line width.

 

What is wrong there. I am using current version of Cura on a mac. I 

IMG_8173.JPG

Share this post


Link to post
Share on other sites
Posted (edited) · Wall thickness calculated wrong

 OK, I clicked on the! Next to wall line countc and set it back to an automatically calculated value. Then the wall thickness was unlocked. Now setting the walls thickness three times the line with brought the wall kine count back to three but now showed the right wall thickness. Print is running and we will see if that solved the problem. 

This post brought me on that track:

 

Edited by NozzleMover
Link added

Share this post


Link to post
Share on other sites
Posted · Wall thickness calculated wrong

It seems to me that either I am asking the wrong questions or no one is actually in this forum. 

Nevertheless:

I change the wall thickness to 1.05 and Cura shows in layer view 6 lines for a 2.1 mm part using a 0.35mm nozzle. 

Results look still strange. Outer wall is sometimes missing.

Anyone an idea?

19CDAE92-3F2B-4E5A-BE29-96E3C5F768E0.jpeg

384DD671-C9F7-4548-901B-84289AE9D754.jpeg

52ED8B42-270B-4116-8DB0-9204EBF6C0F2.jpeg

Share this post


Link to post
Share on other sites
Posted · Wall thickness calculated wrong

With Slic3r the exact same part, with the same settings, prints right.

 

Come on Cura-guys! The problem I described above is truly a problem in Cura. You should be interested in fixing that. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!