Jump to content
Ultimaker Community of 3D Printing Experts
Travis12

Cura slicing adding and erasing features

Recommended Posts

I'm trying to make what I thought would be a simple object, a house shape pen holder with a simple door and window shaped design. At first the designs stuck out 1mm but when it printed it added lines next to the doors that shouldn't be there. I thought it might fix it if I reduced the design to sticking out 0.5mm and got the opposite problems, features of the design that were supposed to be there disappeared(specifically the right side of the door). It looks fine in normal view but if you go to layer view the errors become apparent. In the photos my first iteration is on the left and the latest iteration on the right. I've tried every single combination of options under the "fix horrible" tab but nothing helps. I'm using Cura version 21.045ade89b668d93_ScreenShot2018-04-23at7_19_28PM.thumb.png.82d969b3db59a3d295209878062d9c6d.png5ade89bb06b45_ScreenShot2018-04-23at7_23_10PM.thumb.png.f4de991375190f87158d703f22434f54.png5ade89b8e300c_ScreenShot2018-04-23at7_22_57PM.thumb.png.1ab2a8105aa7c237ff60da4da8f3b39f.png5ade89b789bc3_ScreenShot2018-04-23at7_20_43PM.thumb.png.7b0be407d295cd340365c7d582e5c4a9.png

Share this post


Link to post
Share on other sites

In advanced or expert settings (I forget which )there are 4 settings in the "fix horrible" category.  Uncheck all of those just in case.  Also in cura xray view if you see anything that is red then that's most likely the problem.

 

But I doubt there are any of those types of errors in your model as fusion 360 is pretty good about making manifold STL files.

 

Instead I think that the trim around the door is touching the house but is a separate object and cura thinks it's too small to print and doesn't realize they are supposed to be connected.  You want no surfaces between the trim and the house.  I could be wrong about this.  It could be a bad model.

 

netfabb free repair service is here (you have to create an account though):
https://service.netfabb.com/login.php

 

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 130 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!