Jump to content

Verkaufe UM2/UM2+/UMO+ Board´s


zerspaner_gerd

Recommended Posts

Posted · Verkaufe UM2/UM2+/UMO+ Board´s

Ich Verkaufe meine nicht mehr benötigte UM2 Board´s

 

Und bevor ich es auf eBay versuche frage ich hier mal nach!

 

Einmal ein Originales Ultimaker Board, unverändert

20180508_150013.thumb.jpg.8cff5f449531445b37a2184b6bce12ed.jpg

Das war ca. 1 Jahr im einsatz

 

Dan habe ich mir das Originale Board als Ersatzteil beiseite gelegt und ein China Board gekauft, der Grund war weil Ultimaker den 5ten Stepper Treiber entfernt hat und ich wollte da nicht ohne Board da stehen.

Wusste nur noch nicht das es schon bessere Boards auf den markt gibt.

 

Auf den China Board Treiber habe ich kleine Kühler installiert und TL-Smoother sind noch angeschlossen

20180508_164903.thumb.jpg.7d5b07026c877535a349c9c58331b735.jpg

War auch nur ca. 1 Jahr in Einsatz

Zur Elektronik habe ich kein Unterschied zu den Originalen festgestellt, nur die Stecker sind hier und da etwas krumm und die Hinteren Stecker (USB, Strom, Schalter) haben ein paar mm unterschiedliche Abstände sodass ich die Aussparungen am Gehäuse des Ultimaker etwas ausfräsen musste (evtl. vorher kontrollieren?)

 

Und es war das Display Board noch dabei, dies hatte ich aber noch nicht montiert

 

 

Falls Fragen schreibt einfach

 

Gruß

  • Link to post
    Share on other sites

    • 1 month later...

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...