Jump to content
Ultimaker Community of 3D Printing Experts

What causes this noodle print issue?


Recommended Posts

Posted · What causes this noodle print issue?

0.8 nozzle

 

i have very good result when using 0.4 line width but with 0.6 line width I often get those noodle sculptures 

 

interestingly the base layers often are fine image.thumb.jpg.f881a948dc6dc49d6aea7daf4161926e.jpg

 

 

  • Link to post
    Share on other sites
    Posted · What causes this noodle print issue?

    I assume that you changed the nozzle size in the printer from 0.4 to 0.6?? and by OFTEN, you mean every time withe same settings? or just some times yes and other not? Which material are you using? and that.. looks like only has a wall of 1 layer. When was the last time you cleaned the nozzle?? There are so many variables, that is difficult to guess with only that information.  ?     3D printers are not plug and play, even if you pay 5000 dollars for 1!!. Not to mention the cost for parts... That reality is depressing/shocking...

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...