Jump to content
Ultimaker Community of 3D Printing Experts

Problem with specific filament on my um2+ extendeds


Cactuar
 Share

Recommended Posts

Posted · Problem with specific filament on my um2+ extendeds

Having a weird issue on both of my ultimaker 2+ extended. This issue only occurs with makergeeks filament. I only use pla right now. Example of what happens is the pink flower. Print has really thick grooves, also some under extruded areas. Nozzle is never clogged, as print finishes. Gold flower is polyalchemy gold rush. This issue happens with every color of makergeeks filament. Seems to be more of a problem when printing at .2 layer height. 

Printing specs:

0.6 hardened steel nozzle
0.2 layer height
Cura 3.3.1 (also had same issues on 3.1)
Using built in pla settings (230 temp with 0.6 nozzle 210 with 0.4) 
Bed at 60 or off (both results are same)
Print speed max 50 and I've dialed it down on the ultimaker directly to even 75% of that speed, no change. 
Flow at 100% increasing this had no change.

While the gold flower looks like it sort of had the same issues I think this was heat caused as the darker areas are not any more pronounced than the other layers. The layers all feel the same height. With the makergeeks pink flower, you can not only see but feel the difference where the lines are greatly indented compared to the gold flower.

Any advice on what to change? Printing at 0.1mm layer height seems okay. But for speed I sometimes need to print at 0.2 layer height.

20180529_203809.jpg

20180529_203953.jpg

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...