Jump to content
SandervG

Architect Design Contest | Vehicles.

Recommended Posts

Posted (edited) · Architect Design Contest | Vehicles.

1.thumb.jpg.084d84ad049766380fbc941c9cfae84c.jpg

 

Here's my entry in the contest, as the Netherlands are big in Logistics I decided to design a set of material handling equipment (MHE)

I made 7 vehicle types, each with a variety in loads to carry, making a total of 22 unique pieces.

 

stepfile.thumb.png.d843f34530be6131a7a0900a28fc0059.png

 

Looking from top to bottom;

NAT ; narrow aisle truck (man up)

FLT-2T  ; 2 ton electro forklift

RT ; 1.6 ton Reachtruck

OPT: orderpicktruck with 3 rolcages

Tow ; Towtruck

FLT-4t-;  4Ton Gas powered forklift

FLT_10T ; 10Ton diesel forklift

 

Print the files as they are, laying flat, I printed them quickly in PLA, using a 0.4 nozzle and 0.15 layer.

 

You can find all files here on YouMagine, including a step file so you can make any changes in most CAD software, if you make any new variants please share them back....

https://www.youmagine.com/designs/material-handling-equipment-scale-1-100-architect-design-contest-vehicles

 

2.thumb.jpg.6c849d24cf97e80f0ec78182e49c638c.jpg

 

 

and to promote the contest a bit I also uploaded here;

https://www.thingiverse.com/thing:2975986

 

 

 

 

 

 

 

 

 

Edited by ultiarjan
  • Like 10

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.
23 hours ago, ultiarjan said:

1.thumb.jpg.084d84ad049766380fbc941c9cfae84c.jpg

 

Here's my entry in the contest, as the Netherlands are big in Logistics I decided to design a set of material handling equipment (MHE)

I made 7 vehicle types, each with a variety in loads to carry, making a total of 22 unique pieces.

 

stepfile.thumb.png.d843f34530be6131a7a0900a28fc0059.png

 

Looking from top to bottom;

NAT ; narrow aisle truck (man up)

FLT-2T  ; 2 ton electro forklift

RT ; 1.6 ton Reachtruck

OPT: orderpicktruck with 3 rolcages

Tow ; Towtruck

FLT-4t-;  4Ton Gas powered forklift

FLT_10T ; 10Ton diesel forklift

 

Print the files as they are, laying flat, I printed them quickly in PLA, using a 0.4 nozzle and 0.15 layer.

 

You can find all files here on YouMagine, including a step file so you can make any changes in most CAD software, if you make any new variants please share them back....

https://www.youmagine.com/designs/material-handling-equipment-scale-1-100-architect-design-contest-vehicles

 

2.thumb.jpg.6c849d24cf97e80f0ec78182e49c638c.jpg

 

 

and to promote the contest a bit I also uploaded here;

https://www.thingiverse.com/thing:2975986

 

 

 

 

 

 

 

 

 

Great work Man !!!!!

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.

Hi everyone

Here we post our own designs for this contest. We hope you enjoy!

Please give us your kind feedbacks.

Innolabs.ir.zip 

 

Best Regards

Ali

www.Innolabs.ir

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.
5 hours ago, pardis3d said:

Hi everyone

Here we post our own designs for this contest. We hope you enjoy!

Please give us your kind feedbacks.

BesInnolabs.ir.zipt Regards

Ali

www.Innolabs.ir

 

Ok, here's some feedback. I did not llok at all models, but here's feedback on a few. Though I like the designs, the models are not set up very well if you intended to print them without support.

 

doesnotlayflat.thumb.png.207e076700ed9263fb482f67595ec6e0.png

 

For example, looking at the wheels, you intended to print it without support, on it's side, but the model does not lay flat, as the tank is wider than the base of the trailer.

 

 

 

2smallStart.thumb.png.27e032a542f28cf16cb1ac905084846f.png

 

This trailer will have such small detail, such small islands to start on the glass-bed, that they will fail during printing.

 

 

 

 

benzwheels.thumb.png.472664d261abb92df942e800878bb65b.png

 

This bus does not have the wheels optimised for 3d printing, and probably the details of the windows are to small to print.

 

 

 

image.thumb.png.bcf06e3dc226c1f7e75a51f81bd0c7c7.png

 

here you have optimized the wheels for printing, but the front of the truck is not touching the buildplate, so it will not print without support

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  • Like 2

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.

One more week to go! Curious to see what else will be submitted ?

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.
7 minutes ago, SandervG said:

One more week to go! Curious to see what else will be submitted ?

Oh man...I thought I missed this opportunity! I have been so busy playing catchup, it was the thing that fell through! Thanks for the reminder!!

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.
5 minutes ago, kmanstudios said:

Oh man...I thought I missed this opportunity! I have been so busy playing catchup, it was the thing that fell through! Thanks for the reminder!!

 

Looking forward seeing your submission kman! ?

Share this post


Link to post
Share on other sites
Posted (edited) · Architect Design Contest | Vehicles.

Thanks ? This was what I finished up when I realized the date:

Batty.thumb.jpg.ddf6bfbff7a55bf389bda2263349ab24.jpg

Cannot get much further than than this from the challenge. ?

 

Vehicles are next....got 'em started, just need to finish and make right.

Edited by kmanstudios
  • Like 4

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.

OK, printing out the last of the trial designs. I would not want to upload the files to have an issue that could not be solved. I should have everything ready by Saturday. The designs are done.,...just waiting on the prints to be finished.

 

Hope that falls within the time frame. ?

 

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.
5 hours ago, kmanstudios said:

Hope that falls within the time frame. ?

 

You have until July 9th (Monday), so should be in time! Curious to see what you'll submit!

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.

That gives me time to reprint one of the sets that warped a bit. Been a long time since I did not get my PLA stuck down very well. Dunno what happened there.....

 

Thanks!! :)

 

Share this post


Link to post
Share on other sites
Posted (edited) · Architect Design Contest | Vehicles.

So!! Here is what you get!!

 

Each set has 6, count 'em! 6!! Vehicles to choose from! 3MF Files are in proper printing orientation for ease of model imports.

3MF_Files.thumb.jpg.f10d48c9ea8cc1ebbb37411c8806f428.jpg

I do not think that is enough!! DO YOU?!??

200.gif.7b196a1a90081a82d6389cfca58bb3c8.gif

Well, Since YOU Asked

 

Each Set Has been pre-rendered to make sure YOUR experience is as painless as possible!

Prints-1.thumb.jpg.c47fd8a3b152d4305a1a20d479dc8735.jpg

but-wait-theres-more-gif-14.gif.dbf3a33758523143a1359190572bff06.gif

Prints-2.thumb.jpg.f7f67fe09c1cb94bd47c13c230b0ffad.jpg

but-wait-theres-more-gif-5.gif.38f6c88d771cbed5e49e0cd41c8ecf30.gif

You mean, THERE'S MORE?!?!?

clint-eastwood.gif.a496ba5b500e98d541a0b0ef494142d8.gif

 

FlatBedRenders.thumb.jpg.08d211b47f830bc45f64552e6163321c.jpg

giphy.gif.29ae7f7d3f658bb5ace2703722033670.gif

Download NOW and You Get a Special Bonus File!! Hurry Now because in the NEXT 5 MINUTES YOU Get 2!! in ONE FILE!!!!

FlintStoneMobile.thumb.jpg.2fdb0f8564598ee0861bdd806af509fe.jpg

 

Offer Void Where Prohibited by Good Taste!! ?

UM3E_Cars_PLA-04mmNoz_01Lay.curaproject.3mf

UM3E_Vans_PLA-04mmNoz_01Lay.curaproject.3mf

UM3E_Construction-Main_PLA-04mmNoz_01Lay.curaproject.3mf

UM3E_Construction-Bins-CementMixer_PLA-04mmNoz_01Lay.curaproject.3mf

UM3E_Flintstonemobile_PLA-04mmNoz_01Lay.curaproject.3mf

 

It was brought to my attention that in my over nighter stupor. I did not put up STL files.

Well! Here YA GO!!!!!?

KmanVehicles_STLs.zip

980x.gif.b33ea2f05664f5bad3c58ef90bae97da.gif

ICE CREAM!!!

tumblr_o3i2kh8QcS1qap8yjo2_r5_400.gif.eeaad331f87b4e459f9f4cccc098ae92.gif

 

yummmmmmy ?

Edited by kmanstudios
  • Like 4

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.

Hey Everyone!

 

I just signed up to community forum, and this is my submission!

 

I designed 6 different railway vehicles with various technical drawings that I've found on internet. Each one is based on a specific railway vehicle. There are:

 

Paris, France Siemens Avanto

Portland, USA -If I'm not mistaken- Skoda Astra Double Ended

Kuala Lumpur Putra, Malesia Bombardier Advanced Rapid Transit

Marseille, France Bombardier Flexity Outlook

New York City, USA Bombardier Former IRT Lines

Toronto, USA Bombardier

 

To give a proper credit, whole Info is taken from: GeoCities

 

Zip File Includes:

Each Vehicle in Separate Folders

 

In each folder:

Vehicle's .3DM file (Rhinoceros 5)

 

Vehicle's .stl files as VehicleName_Whole   and Vehiclename_PartX (X is Part Number)

 

Vehicle Renderings as example; Laid on side, Exploded and Whole

 

Reference .JPEG file

 

My aim on these designs was to simplify each design as much as possible and make them all clearly different at the same time. There were few rules that I had whilst drawing such as all windows and door must be voids. 

 

Also, some of them require a drop of glue to assemble, whilst some are assemblable without glue. If you have a printer with large printbed, you can also print it as a whole!

 

I hope you all will enjoy them, and best luck for all participants!

 

If there are any questions or ideas, feel free to contact me!

 

 

 

Railway_Entourage_Set.zip

  • Like 2

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.
13 hours ago, kmanstudios said:

I do not know how to process this...good or bad?

I think this is good.

Share this post


Link to post
Share on other sites
Posted (edited) · Architect Design Contest | Vehicles.
14 hours ago, kmanstudios said:

I do not know how to process this...good or bad?

 

@kmanstudios I was just very impressed! (Didn’t figure out how you guys post gifs in this post system yet)

Edited by Stefania Dinea

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.
Just now, Stefania Dinea said:

 

@kmanstudios I was just very impressed! (Didn’t figure out how you guys post gifs in this post system yet)

Ohhhh...ok....Just know that is a processing issue on my side (Asperger;s) so please do not be offended. :) I find the gifs, save them to my hard drive and then slide them in as regular media. I found that linking gifs is very limited and this was the way to go.

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.

@kmanstudios To be clear ( i noticed sometimes I am not so clear) - I was very impressed with your work on your submission - and the outcome - so the daaaamn! Was for that , in lack of a gif :((

  • Like 2

Share this post


Link to post
Share on other sites
Posted · Architect Design Contest | Vehicles.

Thank you,. no worries :) I am just a dunce at some of those things. Some I get, some go right over me. :) Thank you for the clarification....I just thought the goofy presentation was maybe a bit too 'unserious' for some.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 98 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!