Jump to content
Ultimaker Community of 3D Printing Experts

Reducing Stringing with TPU95


Recommended Posts

Posted · Reducing Stringing with TPU95

I've recently started printing a set of stoppers out of Ultimaker's TPU95 material. This material is great and extremely shock absorbent, but it tends to string more than other filaments due to its flexibility. This becomes a slight issue when printing two of these stoppers in the same build tray, since when it goes from one tower to another it will string and leave a small blob of material on the surface of the part. In other materials these blots can be easily taken off, but with TPU it becomes harder since the material tends to elastically stick together. Has anyone found any particularly good retraction settings to reduce stringing in TPU?

 

Here's a picture to illustrate the blotting I'm talking about, seen on the front surface of the square tower:

 

739987254_TPUstringing.jpg.c1c4f5cf357818cd15a07c65511a1064.jpg

  • Link to post
    Share on other sites
    Posted · Reducing Stringing with TPU95

    I solved the problem by printing pieces one at a time when it comes to TPU95A. It won't take more time anyway, you'll just have two 1h print instead of one 2h print. ?

  • Link to post
    Share on other sites
    Posted · Reducing Stringing with TPU95

    That is certainly a possible approach - the problem is that this Ultimaker is being set up to be used in production, which means it would be expected to make trays of parts at a time to reduce change-over/excess handling. If it were just for engineering though I agree, printing one at a time would work fine.

  • Link to post
    Share on other sites
    Posted · Reducing Stringing with TPU95

    Based on personal experience, I would strongly advise against the printing of trays of parts for one simple reason: if something goes wrong and a print fails, it's better to loose one part and one hour of printing, plus the material used for that part, than 10 parts and ten hours of printing, plus the material used for said parts.

     

    As for change over and excessive handling, you just need to buy a second glass bed: when the first print is done, you remove the glass bed, put in the second one and start the print of the second part, which takes about one minute or two. Then you can get the first print of the first glass bed, clean the glass and you're ready for the third print.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...