Jump to content
Ultimaker Community of 3D Printing Experts
  • Sign Up
cjryker06

UM3 Safety Shutdown?

Recommended Posts

Posted · UM3 Safety Shutdown?

Does anyone know of any safety features that engage on UM printers if they detect a problem? In my situation I believe it to be the X / Y stepper motors overheating.

 

The problem: printer stops printing after about 30 minutes,lights go off, all heaters shutoff, display shows no issue for several minutes then shows X / Y motors stuck or switch broke (ER17) with the print head in the middle of the bed 

 

A little insight to my situation:

1. problem didn't exist prior to today when I updated firmware (does firmware have a way of knowing motor temps?)

2. stepper motors are getting hot enough to the tough that it is very uncomfortable to keep your hand on them (too much voltage?)

3. takes roughly the same amount of time for the shutdown to occur when trying to print the same part twice (time for motors to overheat?)

4. UM3E roughly 6 months old

 

My first thoughts are safety shutdown. I don't feel it would be an improper voltage setting from the factory that took almost 6 months to appear, nor a thermal runaway issue considering it indicates a movement problem. Any help would be great.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Talking additive | The 3D printing podcast
      Why should we be the only ones asking questions? Join us and ask Jabil all your questions on September 22nd 5pm CET
        • Like
      • 2 replies
    • Ultimaker masterclass: Optimizing your Ultimaker Cura workflow
      Save your seat for either broadcast on September 23.
      What will you learn?
      · Best practices for iterative print preparation and every lesson you should learn from each print
      · The right way to use per-object settings and when they are most useful
      · Easy-to-use resources for anyone who wants to develop their own printer definitions, plugins, or print profiles
      · How to optimize print profile settings and whether to “keep” or “discard” changes
      · When is the right time to export your drawing from CAD? (Based on Ultimaker Cura’s surprising power as 3D control software)
      · And a whole lot more tips and tricks!
       
      How can I join?
      This free masterclass will take place twice:
      1. 11am CEST (5pm SGT, 5am EDT)
      2. 5pm CEST (11am EDT, 8am PDT, 11pm SGT)
        • Like
      • 0 replies
    • Do you use 3D printing at work? Let us know
      It doesn't matter if you are using 1 Ultimaker or 10, there is inspiration in everything. We're looking for ...
      • 1 reply
×
×
  • Create New...