Support Artefacts

[18R0 0]

Hi.

Since I didn't found anytihg regarding this i thought i may ask.

If anyone already created a topic adressing this you may put a Link here and this could be Closed.

 

My problem is that there is Support generated where it is complete and utter nonsense

As  you see i want the Holes to be supported because i like to Print Nylon as Hot and Fast as it gets in order to get strong Parts.

If they warp a bit its not that bad because i machine them anyway.

But somehow these "Support Towers" appear.

They are annoying because i use Z-Hop and Retraction with Combing off in order to prevent the Printhead from knocking the parts off the Buildplate..... as you may know Nylon could be a bit tricky when it comes to thick walls.

Anyway the Printer does a lot of extra Z-Hopping and Retraction in order to print the usless towers.

As we all Know to much retraction is not the best thing to have.

Any Idea?

Thanks in Advance.

Flo

Edited June 25, 2018 by 18R0

[ahoeben 1,850]

Use the search in the sidebar to look up the setting named "Support Horizontal Expansion", and set it to 0.

[18R0 0]

Thank you!

Now it's ok the "Towers" are gone.

?