Jump to content
Ultimaker Community of 3D Printing Experts

Ultimaker 2 Extended printer suddenly stopping


Recommended Posts

Posted · Ultimaker 2 Extended printer suddenly stopping

Hi

 

One of my Ultimaker 2 extended 3D printers facing the issues.

1. Ultimaker 2 extended 3D printer suddenly stops the printing, and that time we are not able to operate the machine,

2. when the print is running if we want to operate Tune option it also stops and stuck like a statue.

 

for this above issues, we have updated latest version firmware but this issue is not resolved

Please find the below-attached videos link and give some solution.

https://drive.google.com/file/d/1znHBtSAq67e0pOocfvSAuuN9T_nTU9cr/view

https://drive.google.com/open?id=1sODiV2k9g2d76LRNxAsVVogBmOn-a6dh

  • Link to post
    Share on other sites
    Posted · Ultimaker 2 Extended printer suddenly stopping

    Which firmware version are you running (what is the number of the version you installed?) and which version of Cura are you running? 

    Have you modified anything in Cura that might alter the start of the gcode, like changing the g-code flavor? 

  • Link to post
    Share on other sites
    Posted · Ultimaker 2 Extended printer suddenly stopping

    Dear SandervG

     

    Thanks for the reply!

    We are using the firmware version 15.04.5 and Cura also we are using the same version (15.04.5).

    we have not modified anything in Gcode.

     

    if we update the latest firmware version( 3.3.1) to the printers the feeder gear is rotating reverse while loading the filament.

     

     

  • Link to post
    Share on other sites
    Posted · Ultimaker 2 Extended printer suddenly stopping

    Dear  SandervG

     

    Any update on the issue.

     

    Please give some solution ASAP. because we are facing the issue with two Ultimaker 2 extended printers.

     

    Waiting for the reply!

  • Link to post
    Share on other sites
    Posted · Ultimaker 2 Extended printer suddenly stopping

    Hi Praveen, firmware is not the same as the Cura version. You should connect your Ultimaker to your pc, open Cura, go to manage printers and select upgrade firmware. Here are instructions.

     

    This should probably help! 

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...