Jump to content
Ultimaker Community of 3D Printing Experts

PVA constantly oozing during print


Recommended Posts

Posted · PVA constantly oozing during print

Hello all!

I don't have a picture at the moment but I am having an issue with PVA.

I JUST got the UM3 this week and made a test part with some various overhangs to test out the dual extrusion since I have never had it before. I used PVA as the support material so I could dissolve it of course, but during the beginning of the print, the PVA was oozing pretty consistently. About 1/10 of the way into the print it stopped oozing as much but never totally stopped for the rest of the print. Not a big deal if I am going to dissolve it right away I know but I was curious if there is a full proof way to stop this from happening at all. 

I saw a few threads on the subject but the content was still a bit off from the problem I am having. 

 

Any and all help is definitely appreciated ?

 

Thanks! 

  • Link to post
    Share on other sites

    Posted · PVA constantly oozing during print

    Im thinking that might help. The troubling part is, the settings are setup to be completely stock for both the machine and Cura so I assumed everything should be fine. 

    I will try that tomorrow when I get back to work and see if it helps. ? 

  • Link to post
    Share on other sites

    Posted · PVA constantly oozing during print

    I have had to play with things a bit and not as much as others, on my UM3E machines and they are stock machines. And, PVA is such a goofy material to work with anyway. Environment really plays a big part of that experience.

     

    And, to make sure, it is the BB core in the Material 2 slot for use with the PVA.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 10 replies
    ×
    ×
    • Create New...