Jump to content
Ultimaker Community of 3D Printing Experts

Print Jobs - Recent History


Raf
 Share

Recommended Posts

Posted · Print Jobs - Recent History

Hello

 

I would like to know if there is a way to clear the print job history.

More specific one or more jobs or clear the the whole list altogether.

The reason for this is I printed a part a few times with different settings and 

i would like to remove the ones that are not correct. This so that one of my

colleagues can not accidentally reprint the wrong one.

 

  • Link to post
    Share on other sites

    Posted · Print Jobs - Recent History

    Hi,

     

    I think you mean Cura Connect - if so, I am not aware of a way to clear the print job history. The only way I know of would be to reset Cura Connect on the printer, but then you would have to set-up the group again ?

  • Link to post
    Share on other sites

    Posted · Print Jobs - Recent History

    The recent history can currently only be deleted by means of "nuking it" (aka; Doing the reset that Nicolinux describes).

     

    In the 5.1 release, it's possible to delete specific jobs from the recent history, but this requires the machine to be in dev mode and some manual bash magic. This is not for the faint of heart and definitely not recommended. 

    Also note that the list always keeps the last 10 jobs, regardless if they were duplicates or re-prints. So if you print the same job 10x, that's all there will be in the recent history. 

  • Link to post
    Share on other sites

    • 2 years later...

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...