Jump to content
HarrySatt

ULTIMAKER in Enterprise Level WLAN and LAN

Recommended Posts

Posted · ULTIMAKER in Enterprise Level WLAN and LAN

Hi there

I would like to get our ULTIMAKER 3 connecting to our Enterprise Level WLAN and LAN. Therefore I would need to know the MAC address because this is what is used for making a device visible in the university internal network space (MAC address for WLAN and LAN adapter). The MAC I have to send to our IT department.

After the MAC is registered I can connect to our network. 

The other question is if enterprise level stack is available on ULTIMAKER 3

 

Regards and thaks for answer.

Harald Sattmann

Share this post


Link to post
Share on other sites
Posted · ULTIMAKER in Enterprise Level WLAN and LAN

Are you in a position to setup the UM3 on your own LAN?  If so, connect the UM3 to a router, both wired and wireless.  Put your laptop or PC on the same network.  Assuming you're running linux, run:

sudo nmap -sP 192.168.1.0/24

where 192.168.1.0 is the actual is the subnet and /24 is the actual mask.  You should see a report of all devices connected to that network.  Look for hostnames that have Ultimaker in them.  You should see the MAC addresses of the interfaces of all the hosts on the network.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 19 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!