My apologies for the confusion, if you follow this link you'll find the correct datasheet.
I'll also correct the link in my original post to avoid future confusion.
My apologies for the confusion, if you follow this link you'll find the correct datasheet.
I'll also correct the link in my original post to avoid future confusion.
No problem, thanks for correcting this. I'm really looking forward to trying out the new materials.
Recommended Posts
P3D 46
Thanks for posting - great to finally see Ultimaker endorsing reinforced filaments. What I really like about the technical data sheet is how it explicitely states the properties measured along and across the printing lines (even if the Z-direction is still missing).
However, the properties stated on the data sheet you linked are different from those I found here on the manufacturer's page: https://www.dsm.com/content/dam/dsm/additive-manufacturing/en_US/documents/novamid-id1030-cf10-leaflet.pdf
Do you know why they are different, even if they are for the same material?
Edited by P3DLink to post
Share on other sites