DSM Novamid® ID1030 CF10

[SandervG 1,521]

Through our alliance with larger material manufacturers we're happy to share the first filaments that become available to you through our Ultimaker ecosystem.

 

One of those new materials is Novamid® ID1030 CF10, it's a carbon fiber filled grade PA6/66 filament. With a 10% carbon fiber reinforcement, it produces stronger, tougher and stiffer 3D printed parts. 

On a short notice the materials will be available to you through Ultimaker Cura. 

 

Novamid® ID1030 CF10 Data sheet.

 

If you have any questions or experiences you want to share about this material, please share them below ?

 

 

[P3D 46]

Thanks for posting - great to finally see Ultimaker endorsing reinforced filaments. What I really like about the technical data sheet is how it explicitely states the properties measured along and across the printing lines (even if the Z-direction is still missing). 

 

However, the properties stated on the data sheet you linked are different from those I found here on the manufacturer's page: https://www.dsm.com/content/dam/dsm/additive-manufacturing/en_US/documents/novamid-id1030-cf10-leaflet.pdf

 

Do you know why they are different, even if they are for the same material?

Edited September 27, 2018 by P3D

[SandervG 1,521]

My apologies for the confusion, if you follow this link you'll find the correct datasheet.

I'll also correct the link in my original post to avoid future confusion. 

[P3D 46]

No problem, thanks for correcting this. I'm really looking forward to trying out the new materials.