Jump to content
AndersK

Add:north Textura

Recommended Posts

Posted · Add:north Textura

I recieved some samples from Add:north and have done a test print from their Textura Flare Rocky Grey.

Its basically PLA with added plant fibres which gives a matte surface and helps hiding the layer lines.

 

https://addnorth.com/en/

 

I'm pleased with the outcome regarding visual appearance, ease of print and strength (drop tested from the desk ? )

I work alot with cast parts and compared to cast iron it looks great, last picture.

 

First picture shows the real cast aluminum part, Ultimaker PLA and the Add:north.

Both are printed without support.

Layer heigth  is 0,3 mm in the lower half and 0,1 mm above. 

 

IMG_20181001_45934.thumb.jpg.3b9e6452c9a4b8414d287a931894b7f5.jpgIMG_20181001_30283.thumb.jpg.c2f3f644d99ac85307756814cec99970.jpgIMG_20181001_3755.thumb.jpg.cce3c09b780b575eaf163d010ecac3ab.jpgIMG_20181001_50168.thumb.jpg.f26ccb9eda9d1ce2d507bacf5e9ecf4a.jpgIMG_20181001_4326.thumb.jpg.fef8095fcd267ebb4c614fcf93f92352.jpgIMG_20181001_16443.thumb.jpg.c900623a5bb470e8f863ff897bfebc94.jpgIMG_20181002_14138.thumb.jpg.f1631f20bbc2df59c90780a756f3b3a3.jpg

 

 

 

 

 

 

 

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited) · Add:north Textura

That looks really nice.

What settings did you use and what printer are they printed on?

Those overhangs are printed waaay better than I have ever achieved on any type of filaments.

 

I was just about to upload pictures on my X-PLA when I saw this

Edited by TMicke
Clarification

Share this post


Link to post
Share on other sites
Posted · Add:north Textura

Thx, it's made in a UM3

Used the settings recommended in the sample box. 190° and 70 mm/s I think, will check tomorrow and correct if it was different.

 

I didn't intend to print without support but the second extruder got clogged, but yes, did come out great.

Took a shot when printing the overhangs, looks indeed impressive

IMG_20181002_2896.thumb.jpg.70d6c4300f4e1b61d9fc4c52978036c2.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 18 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!