Jump to content
akar

Cura printing issue - different printing style ?

Recommended Posts

Posted · Cura printing issue - different printing style ?

Hi, after some time I started to print again on my Anet A6 printer, so I have installed the newest Cura 3.5.

 

Unfortunately, the printing quality is bad. The printer does not put the line on the new line, but it is trying to do some 30 degrees connections. 

 

See the picture below where on the left side is the bad printout and on the right side is the correct one.

 

SmartSelect_20181007-104016_Gallery.thumb.jpg.b2435d4dac3aa4050412f7de3b284c1b.jpg

 

I tried different settings. Unfortunately, I haven't found the way how to fix the printing quality - to have the printout nice and smooth.

 

Thank you for help

 

Regards

 

Share this post


Link to post
Share on other sites
Posted · Cura printing issue - different printing style ?

Hi,

 

Did you already found a solution? I have the same problem.

 

Thank You

 

janne2be

Share this post


Link to post
Share on other sites
Posted · Cura printing issue - different printing style ?

Still not. As a workeround, I'm using the older Cura version

Share this post


Link to post
Share on other sites
Posted · Cura printing issue - different printing style ?

Please save the project file and attach to this thread so we can look at the model and settings. Thanks.

Share this post


Link to post
Share on other sites
Posted · Cura printing issue - different printing style ?

I think a material with a 2.85 mm diameter got selected during an upgrade. Does the materials dropdown Show Ultimaker materials?

 

Could you try reselecting generic PLA?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • January 22nd  | Ultimaker webinar 'Learn how to choose the right composite material'
      We’ll teach you how to choose the right composite material for your application in our new 40-minute webinar. You will learn how to: 
       
      • Make the perfect choice between glass and carbon fiber 
      • Identify more high-value applications that would benefit from composites 
      • 3D print advanced materials with the right settings 
      • Select the best materials for 3D printing end-use parts 
      • Use dual extrusion to take composite 3D printing to the next level 
      • 0 replies
    • Does your company use Ultimaker? Know one that does? Let us know!
      If your company uses Ultimaker in any capacity, we'd love to hear about it! If the story is there, and you're up for it, maybe we can work together to create a story that will be featured on the site. Here are examples of..
      • 18 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!