Jump to content
Janek

UM S5 deep verical stripes on printed cylinder.

Recommended Posts

Posted · UM S5 deep verical stripes on printed cylinder.

I made test print with UM S5. Sliced with Cura 3.4.1. Left Nozzle 0.8AA (blue)  and Right 0.4AA (green). Printed with PLA, settings are predefined by Cura, except layer height is 0.1mm. Cylinder inner diameter is 10mm and outer is 15mm.

UM_Cura.thumb.JPG.46326016a8c4d1fecc950765ccbe67e0.JPG

0.4AA Nozzle printed very deep identical stripes around outer perimeter of cylinder. These are ca 0.3mm deep. What is causing this issue?

UM_test.thumb.JPG.52ca13c0c743e3696e6156986e47d041.JPG

Share this post


Link to post
Share on other sites
Posted · UM S5 deep verical stripes on printed cylinder.

Please change the colors in cura to show the different line types and make them all visible.  Is it doing non extruding moves (the blue lines) a lot in that area?  Maybe make sure to turn off "coasting" and possibly "outer wall wipe distance"?  Maybe.  

 

I'm really just grasping at straws here.  But I would print a test cylinder and make sure it is still doing this strange issue and then see if changing some settings corrects it.

 

I'm not familiar with this particular issue.

Share this post


Link to post
Share on other sites
Posted · UM S5 deep verical stripes on printed cylinder.

It is not related with coasting and wipe distance as the stripes are identical around the outer surface of cylinder.

UM_S5_cylinder_2.thumb.JPG.c19baad4ab9add71845c766e20af518d.JPG

Picture from the other side.

UM_S5_cylinder.thumb.JPG.835fbe3e9403ccb07920da9ca3fbb77f.JPG

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 98 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!