Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Link to post
Share on other sites
Posted · Q&A Architecture

(extracted from guide 11 - tips and tricks) 

Question: Do you (often) post process your 3D prints, or are they often good to use straight out of the Ultimaker? If you do, what is it that you most often do? 

Answer @Stefania Dinea : I usually use them as they come out of the printer. However sometimes some extra attention is needed. See previous comments.

 

Question: Is there perhaps a post-processing technique you would like to apply but are not familiar with yet? 

Answer @Stefania Dinea : A sanding machine ?! I heard there are gadgets that you can lay a model in for sanding. I am not sure for which techniques of printing they are used for but they sound awesome. 

 

Question: I just started a new job and we want to exhibit our Revit models as 3D printed models. What do you think we should invest in? Ultimaker 3 or 3Extension? Or do you feel Ultimaker S5 is better suited? Maybe some other suppliers of 3D-printers should be considered?

Answer @Stefania Dinea : Well, I have personally tested all low end brands and I can tell you for sure cheap comes with the included headaches. 

The Ultimaker brand usually stands that their products will last a very long time and it never loses the intended purpose. The UM2 is a very reliable and usefull printer. However the biggest complaint in architecture was size, that is why the UM S5 came out in a different format than what we are used to. When you buy a printer for your company then I suggest the latest version available on the market, however if it’s for personal use, then whatever fits your budget. 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 5 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...