Jump to content
Ultimaker Community of 3D Printing Experts

Breakaway Material Quality issues


Recommended Posts

Posted · Breakaway Material Quality issues

Hi Everyone,

 

Just got a new Ultimaker 3 printer.  Things have been going fairly well.

 

We have been using a combination of White tough pla and Breakaway support.  

 

It seems we are getting a lot of oozing / stringing from the breakaway nozzle and its producing small skin tags on the model.

 

From inspection it looks like once the breakaway nozzle is raised up, material continues to ooze out.  To me it seems like the retraction isn't pulling the filament back enough to prevent oozing.

 

 

The software currently is 3.5.0.

 

Using Ultimaker brand filament and using recommended settings.

 

Any help would be appreciated.

 

Cheers,

 

 

IMG_20181017_174118 (1).jpg

  • Link to post
    Share on other sites
    Posted · Breakaway Material Quality issues

    Hi @SandervG,  The print cores are the official Ultimaker .4mm AA cores in both slots and the profile was the recommended standard .2 mm layer height from Cura.  

     

    Supports were generated and build plate adhesion was added at a 20% infill.

     

    No custom settings were made.

     

    Done on Cura 3.5.

     

  • Link to post
    Share on other sites
    Posted · Breakaway Material Quality issues

    Thank you for the information. My first thought was that perhaps a BB core was installed which can cause a material other than PVA to ooze more, but I understand you used 2 AA print cores. 

     

    Can you see if in Cura you have 'Limit support reractions' is enabled or disabled? 

    Can you perhaps share a screenshot of Cura layerview with travel path from the area where it strings a lot ?

     

    Thanks! 

     

     

  • Link to post
    Share on other sites
    Posted · Breakaway Material Quality issues
    4 hours ago, SandervG said:

    Thank you for the information. My first thought was that perhaps a BB core was installed which can cause a material other than PVA to ooze more, but I understand you used 2 AA print cores. 

     

    Can you see if in Cura you have 'Limit support reractions' is enabled or disabled? 

    Can you perhaps share a screenshot of Cura layerview with travel path from the area where it strings a lot ?

     

    Thanks! 

     

     

     

    Hi Sander,

     

    Please see attached.

     

    I did have limit support retractions enabled and I shared a few screenshots of the travel.

     

    One think  I did not was that when the nozzle switched to the main nozzle, the support nozzle was retracted up.  As I watched the support nozzle during nozzle 1 printing its layer, I noticed a small amount of plastic leaking out.  When the support nozzle became active and switched in the down position, that material that has oozed out was then driven into the side support wall and caused a skin tag.

     

    I unfortunately have both white and white breakaway currenltly set up.  I will switch to a black filament I have to get some better contrast.

    Limit Retraction.png

    Layer slice.png

    Layer slice with travel zoomed.png

    Layers sclie with travel.png

  • Link to post
    Share on other sites
    Posted · Breakaway Material Quality issues

    @SandervG

     

    Any thoughts?

  • Link to post
    Share on other sites
    Posted · Breakaway Material Quality issues

    Hi,

     I try to print Pla Tough and breakaway. I have the same problem but less.,

    I use UM3 / Cura 3.6 and I don't change the settings.

    Could you say me which sttings I must change step by step ? Temperature ? retractation ? other ?

     

    Thanks to your help.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...