Jump to content
Ultimaker Community of 3D Printing Experts

No video on S5 in applications


Recommended Posts

Posted · No video on S5 in applications

I just picked up an S5 and noted that it has issues displaying the webcam in applications.

It fails to load in either Cura (3.4.1, 3.5 and 3.5.1) or the Ultimaker iPhone app.

I have tested with the URL as well.  Using the /?action=stream it will try to initiate a download in Edge (Win10) and works fine in Chrome.  Using the /?action=snapshot works in both browsers.  I have tried this on multiple PC's/phones as well.

My UM3 does work fine through the same applications.

  • Link to post
    Share on other sites
    Posted · No video on S5 in applications

    Are you attempting to use the phone application when connected to the same WiFi network that the printer is connected to?

     

    I ask because you can’t configure the phone application to connect via a specific URL.

     

     

  • Link to post
    Share on other sites
    Posted · No video on S5 in applications

    All was done connected to the same network.

    All connected to the same network (and both WiFi and LAN for the S5), I did the following.

    Within Cura, trying to preview a print brings up a black screen with the little page and X in the upper left corner (as though the file/stream fails to load).
    Within Cura Connect, trying to preview a print brings up a black screen with the little page and X in the upper left corner (as though the file/stream fails to load).
    Within the Ultimaker App on the iPhone, trying to preview a print brings up a black screen , though I do not believe I saw the X on that one.
    On two Win10 PC's (same ones that I load Cura on), using Chrome, I.E. or Edge and typing the ULR http://IPADDRESS:8080/?=Snapshot I see the snapshot fine.

    On the same two Win10 PC's (same ones that I load Cura on), using I.E. or Edge and typing the ULR http://IPADDRESS:8080/?=Stream I get a prompt to download ?=Stream.txt as a file.
    On the same two Win10 PC's (same ones that I load Cura on), using Chrome and typing the ULR http://IPADDRESS:8080/?=Stream, I see the live stream fine.

     

     

  • Link to post
    Share on other sites
    Posted · No video on S5 in applications

    I have experienced similar if not the same a couple time.

     

    When I did a Cura Connect reset from the printer control panel the issue was resolved. Early on we also did a network reset however, I believe that the Cura Connecy reset was was cure.

  • Link to post
    Share on other sites
    Posted · No video on S5 in applications
    8 minutes ago, talker13 said:

    That was the fix, indeed.

    Thank you, Shadowman.

    You are welcome .... now pass it on to another in need of assistance as I was initially helped too.

     

    More than anything, I appreciate you sharing that your issue was resolved.

     

    Takes care 

  • Link to post
    Share on other sites
    Posted · No video on S5 in applications

    Thanks for the answer 

    I am having this same issue and will reset it to after my 5 day print.

    don't know if this will interfere with the print  

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...