Jump to content
Ultimaker Community of 3D Printing Experts

Trying to make an Infill-only 3D print


Jaume
 Share

Recommended Posts

Posted · Trying to make an Infill-only 3D print

Hi!

I'm trying to make an infill-only object.

I set Wall thickness & Top/Bottom Thickness to 0 but....

Cura Infill seems to generate some kind of "closing gaps" or will be closing pointing infill lines as shown in the exemple pic

Any ideas how to avoid those extra infill lines that actually don't show up in Cura but appear when printing?

Thanks!

IMG_2782.thumb.jpg.0515be3de235f7c3d841b95d11f447ba.jpg

  • Link to post
    Share on other sites

    Posted · Trying to make an Infill-only 3D print

    Hi @Adam324, this has finally been solved by @smartavionics :

    Thanks!

     

    Thanks, I imported that profile. When I slice your model I get this which doesn't have any explicit lines between the ends of the infill but it is doing non-retract moves (dark blue) so you are probably getting stringing:

     

    Screenshot_2018-10-26_16-05-47.thumb.png.122587f8db23df9531393e06bb05b875.png

     

    If you disable the combing you will get retraction with the moves (light blue lines) and so should not get stringing between the ends of the infill lines:

     

    Screenshot_2018-10-26_16-06-27.thumb.png.b56665c260394feecf277eef0a675bf2.png

     

    Hope this helps!

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...