Jump to content
Ultimaker Community of 3D Printing Experts

Regular Fan Speed at Layer


Recommended Posts

Posted · Regular Fan Speed at Layer

Hi, i'm using Cura with an BQ Hephestos 2 but the part is not sticking to heatbed. I checked that the problem it was when the colling Fan starts working and i would like to reduce the fan speed or just activate it at 5mm height. So i configured the "Regular Fan speed at Layer" setting, but nothing happens, the fan starts working just after the first layer. What i'm doing wrong? another thing i realized is that i configured 4 slow layers but it starts to work faster after the first layer too. I'm not finding the problem, so i decided to ask you some help. You can find a snapshot of parameters in attached files. Thanks in advance.

cura.png

  • Link to post
    Share on other sites
    Posted · Regular Fan Speed at Layer

    If the layers are taking less than 10 seconds to print, it will use the max fan speed. Otherwise it should ramp the fan speed up from 0 to 100% over the first 33 layers.

     

    FYI - my personal Cura includes an option to start the fan at a layer > 0 which the standard Cura doesn't provide. The Cura developers rejected the contribution. I can't remember why now, it was so long ago. Anyway, you can find my releases at https://www.dropbox.com/sh/s43vqzmi4d2bqe2/AAADdYdSu9iwcKa0Knqgurm4a?dl=0

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...