Jump to content
Ultimaker Community of 3D Printing Experts

UM3 - Print Quality Issues


Recommended Posts

Posted · UM3 - Print Quality Issues

Hi.

 

I just bought myself an Ultimaker 3 to replace my Prusa MK3. But I have problems with the print quality.

As I'm going to print many mechanical parts for RC cars which require tight tolerances I decided to compare those two printers with the Maker's Muse Tolerance Test.

 

While the test on the Prusa MK3 (which currently has a slightly broken X-Axis motor mount) with stock profiles (0.2mm layer height) results in all except the 0.15 tolerance to get free (some with a bit of force) but the test on the UM3 shows different results.

First I used the stock profiles that came with Cura 3.6 (0.2 layer height again) and only changed the "Initial Layer Horizontal Expansion" to -0.25 to compensate for an elephant foot. The result was, that only the 0.5 tolerance came free. Even the 0.4 tolerance I couldn't get loose. It only broke by the amount of force I used.

So I turned down the print speed to 35mm/sec. Now I could get all tolerances except 0.2 and 0.15 free.

 

What can I do to get such good print results to also get the 0.2 tolerance free? I think it might be that the layer seam is the problem or overshooting at corners.

 

At the moment my Prusa MK3 is giving me better results than the UM3. I'm a little disappointed in the printer right now. Only positive things for me are the camera, WiFi and the Dual Extrusion.

 

Greetings

Saij

 

P.S.:
Here is the video from Maker's Muse where he explains the tolerance test

 

  • Thanks 1
Link to post
Share on other sites
Posted · UM3 - Print Quality Issues

You could try to turn off acceleration and jerk control in Cura, but then you will get some ringing after the corner. If some ringing is not acceptable then try different speeds for acceleration and jerk.

 

Then set all speeds (infill, outer, inner wall, ...) to the same value.

 

You could try "Outer before Inner Walls" if this makes the result better.

 

Try "Slicing Tolerance" set to Exclusive.

 

Reduce Flow a little bit could also help, but beware of under extrusions.

  • Link to post
    Share on other sites
    Posted · UM3 - Print Quality Issues

    Mh Looks like it is a Cura problem.

    Just sliced the tolerance test in Cura for my Prusa MK3 and printed it. Only got 0.5, 0.4 and 0.3 (with some force) free.

    Tests on my UM3 still running.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • 27 Visiting our virtual showroom

      1. 1. Have you visited our virtual showroom before?


        • Yes
        • No
      2. 2. If yes - what content did you find most interesting?


        • Information about Ultimaker ecosystem
        • Applications & application stories
        • Customer success stories
        • Webinar sessions
        • Material wall & ecosystem partners
        • New product introduction; software subscription plans
      3. 3. What of the below would make you consider visiting (again)?


        • New Live Ultimaker Webinar streams
        • ‘Ask Me Anything’ with industry experts or Ultimaker staff via main stage and public chat
        • New customer success stories
        • New applications
        • Presentations/news from ecosystem partners
        • Opportunity to meet representatives for an interactive tour
        • Helpful videos like Software tutorials
        • Other; leave input in a comment below!

    • Our picks

      • Ultimaker turns 10: A look back
        Ultimaker is turning 10 years old and that means it is story telling time! We'll explore 2010-2014, traveling through the evolution of the business from the Protobox and Ultimaker Original, to the major leaps forward with the Ultimaker 2 and Ultimaker 3.
          • Like
        • 0 replies
      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...