Jump to content
Ultimaker Community of 3D Printing Experts

Cura 3.6 doesn't import my printer settings or profiles.


Recommended Posts

Posted · Cura 3.6 doesn't import my printer settings or profiles.

I have the same problem with Cura 3.6 as I did with 3.5.0 and 3.5.1. It doesn't import any settings or profiles from Cura 3.4.1

 

I have posted on here (three times now) for the previous version, but no one seemed interested in solving my problem. Every person that has shown some interest, just asks for my log file and then never responds again ever...  So here is the log file, again.

 

 

cura.log

  • Link to post
    Share on other sites
    Posted · Cura 3.6 doesn't import my printer settings or profiles.

    As far as I can see from the data you shared, there isn't anything going wrong. So, unfortunately, it is that complex of a problem. 

  • Link to post
    Share on other sites
    Posted · Cura 3.6 doesn't import my printer settings or profiles.

    OK, that's fine. but what bothered me until now is that no one said anything about what's going on. Just radio silence, for two months. 

     

    Is there any other way to transfer the settings? Like an import function. 

  • Link to post
    Share on other sites
    Posted · Cura 3.6 doesn't import my printer settings or profiles.

    Normally it should do this automatically from one version to another. For some reason, this didn't happen on your system. You could try deleting the 3.6 folder and see if re-triggering it works.

  • Link to post
    Share on other sites
    Posted · Cura 3.6 doesn't import my printer settings or profiles.

    I have had this same problem over the last few versions of Cura as well, so: Bump!

  • Link to post
    Share on other sites
    Posted · Cura 3.6 doesn't import my printer settings or profiles.
    9 hours ago, nallath said:

    Normally it should do this automatically from one version to another. For some reason, this didn't happen on your system. You could try deleting the 3.6 folder and see if re-triggering it works.

     

    I did what you asked. It didn't work.

     

    I would have been surprised if it did work this time, as I was asked to do the same for version 3.5.0 and 3.5.1.

  • Link to post
    Share on other sites
    Posted · Cura 3.6 doesn't import my printer settings or profiles.

    Well, i've tried it on Fedora, where it does work.

    Could you try if putting the files from the attached zip in the config folder works?

    3.6_fixed.zip

  • Link to post
    Share on other sites
    Posted (edited) · Cura 3.6 doesn't import my printer settings or profiles.
    On 12/4/2018 at 12:35 AM, nallath said:

    Well, i've tried it on Fedora, where it does work.

    Could you try if putting the files from the attached zip in the config folder works?

    3.6_fixed.zip

    Sorry for the Delay. With Christmas coming up, I have been busy.

     

    I loaded the config folder up, and it looks good so far. I look forward to checking out the improvements since 3.4.1.  Thank you.

    Edited by James777
    • Like 1
    Link to post
    Share on other sites
    Posted · Cura 3.6 doesn't import my printer settings or profiles.

    FWIW, I had this issue for the longest time. Today I upgraded to 3.6.0 and it would appear that all settings, profiles and everything transferred over exactly like it should. First time in many releases. I was a VERY happy camper !

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...