Jump to content
nasosan

file gcode.. how to know parameters used from cura?

Recommended Posts

Posted (edited) · file gcode.. how to know parameters used from cura?

hi, 

if i have a file gcode, make whit cura.. how i can read the parameters used? if i try to open in cura, i see the 3d draw.. but i canot modify or see the parameters used on it.. i must read all gcode lines....

for example, the velocity, the temperature, the % of fill.. the method of fill.. tringular or others..

thanks

 

ps

an example of that i search, but is limited.. is gcode viewer - online.. that see me velocity and other info.. but not all...

Edited by nasosan

Share this post


Link to post
Share on other sites
Posted · file gcode.. how to know parameters used from cura?

As far as I know it is not possible to modify the gcode file with Cura setting. You can only load it and print it, but you cannot modify further setting in Cura. If you have the STL then it is better to save it as a project file, so are able to modify anything later.

  • Like 1

Share this post


Link to post
Share on other sites
Posted · file gcode.. how to know parameters used from cura?
6 minutes ago, Smithy said:

You can only load it and print it, but you cannot modify further setting in Cura.

 

Correct. It would be nice to *see* the settings though. Perhaps I'll have time one of these days to finally implement that.

  • Like 1

Share this post


Link to post
Share on other sites
Posted · file gcode.. how to know parameters used from cura?
5 minutes ago, ahoeben said:

Perhaps I'll have time one of these days to finally implement that.

Days are getting darker and colder, so what could be better than a relaxed coding session in a warm area. You will feel better and better with every code line 🙂

 

Joking aside, wow that would be great!

 

Share this post


Link to post
Share on other sites
Posted · file gcode.. how to know parameters used from cura?
1 hour ago, nasosan said:

i cannot modify the parameters.. i can only see the original..

Yes, because it is not possible.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 181 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!