Jump to content
Ultimaker Community of 3D Printing Experts

Cura 3D ignoring every printing speed setting!


Recommended Posts

Posted · Cura 3D ignoring every printing speed setting!

Please help cause im running out of options :(.

 

Since few weeks, no matter what kind of printing speed settings i set in cura 3D, it always prints with same speed (1st layer, walls, supports, etc.) even if i set 10mm/sec it still goes around 60mm/sec.

 

I tried reinstalling Cura 3D and deleting my presets and used stock ones and other computer.

 

Everything works fine with other slicers tho.

 

Please help, thank you in advance.

  • Link to post
    Share on other sites
    • 5 months later...
    Posted · Cura 3D ignoring every printing speed setting!
    3 hours ago, Raziorx said:

    I got exactly the same issue... I'm stuck 😕

    If this helps, not bes lt solution but i managed to fix it by reinstalling Windows :s

  • Link to post
    Share on other sites
    Posted · Cura 3D ignoring every printing speed setting!
    8 hours ago, pivor said:

    If this helps, not bes lt solution but i managed to fix it by reinstalling Windows :s

    Oh my... 😂 Thanks for the tip !

  • Link to post
    Share on other sites
    Posted · Cura 3D ignoring every printing speed setting!

    I tried setting separate speeds for my 2nd core yesterday (printing text using a different color and smaller nozzle) and noticed it didn't seem to print slower for that material at all.  I set it to 15mm/ps for all line types and it screamed through that part of the print just as fast as the other material, which was set to 30mm/ps.  Using Cura 4.1 on an U3Ext with the latest firmware from a few days ago.

  • Link to post
    Share on other sites
    Posted · Cura 3D ignoring every printing speed setting!

    Still get the issue here, i manage to print by putting "1 mm/s" in print speed... But it's definitely not the best... I don't get it 😕

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit
        Visit our virtual showroom and learn more about the Ultimaker ecosystem!
        • 14 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...