Jump to content
Ultimaker Community of 3D Printing Experts

Recommended Posts

Posted · Colorfabb - woodFill

Colorfabb makes woodFill available to Ultimaker users via our material alliance in Cura. 
You can access all available materials via Cura > Marketplace > Materials. 

 

Are you curious about others experiences using woodFill or do you have any other questions regarding this filament? Feel free to post them below. 

 

Some links you might find useful:
Technical Data Sheet

Safety Data Sheet
Printing Guidelines

  • Link to post
    Share on other sites
    • 5 months later...
    Posted · Colorfabb - woodFill

    That's a tricky print, but a pleasing result, but btw the "Printing Guidelines" link just takes you to the product page now.

     

    Question: Would this be a good candidate for the BB print core?

     

    Also, it would be awesome to have a way to leverage the way these kinds of filament react to temperature variations to produce grain effects. You can do that with post-processing but that's just flat layer-by-layer and the end result is an mdf/plywood effect rather than grain.

  • Link to post
    Share on other sites
    Posted (edited) · Colorfabb - woodFill

    I've printed a number of parts using woodfill and copperfil.  I would not try this on a BB core.  Indeed, once you get to 0.4 and below on an AA core, the printer needs to be monitored for clogging.  I do like the results though!

     

    The way solids are suspended in the filament makes both of them somewhat prone to clogging if your print involves retraction.  I have run them in a hardcore (AA) down to 0.25 nozzle, but that works for short duration prints only, after which I have to do both hot and cold pulls to clear things out.  I'm not sure it would be possible to clear out a BB nozzle without doing harm to it.

     

    This thread is related, I hope this helps.

     

     

     Have fun

     

    John

    Edited by JohnInOttawa
  • Link to post
    Share on other sites
    • 1 year later...
    Posted · Colorfabb - woodFill
    3 hours ago, Alexxx2005 said:

    I loaded WoodFill Materials via Cura > Marketplace > Materials

    but Cura Says Profile is not Supported, what is wrong 😏

     

    That's easy to answer but probably not very satisfying to you.... 😏

    It's the wrong printer and the wrong nozzle size.

     

    If you install this material from the marketplace you get quality profiles for AA 0.8 print cores. One for each of these printers: Ultimaker 3, Ultimaker 3 extended, Ultimaker S5, Ultimaker S3

     

    You can still add one of these four printer models to Cura and have a look at the settings, but that's it.

    It's not (directly) usable for anything else.

     

    The marketplace website is perhaps more useful for you. There's the list of printers that are supported by this profile and links to the appropriate colorfabb website with general printing advice.

    https://marketplace.ultimaker.com/app/cura/materials/colorFabb_team/colorfabb_woodfill

     

     

  • Link to post
    Share on other sites
    Posted · Colorfabb - woodFill

    ah ok perfect , now it works

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...