Jump to content
Swissengineer

HELP! UM3E with big errors (PrintCore taking too long to warm up and XY switches)

Recommended Posts

Posted · HELP! UM3E with big errors (PrintCore taking too long to warm up and XY switches)

Hey guys recently I'm having a lot of issues with our UM3E, every print I get a printcore too long error or X & Y switch errors...

I've changed recently the teflon so not that, check the X;Y switches and everything ok....

I'm thinking the head cable must be the issue? 

 

Here are my logs.

 

Please help!!!!! 😭😭😭

UM3E_logs.zip

Share this post


Link to post
Share on other sites
Posted · HELP! UM3E with big errors (PrintCore taking too long to warm up and XY switches)

I think these are unrelated.

 

The "too long to warm" issue is probably the head cable as you say.  It's trivial to remove the rear two long screws in the head and pop off the rear of the head, reseat the connector, push a little cable in as you put the cover back on (and add some tape as a shim) and re-insert the two long screws.  Takes about a minute.

 

The switches are unrelated to the head.  Push the head around and listen for "clicks".  Then look to see what makes the click.  Sometimes the X rod isn't hitting the Y limit switch when you push it to the rear - X rod needs to stick out a bit to the left to hit that switch.  You might simply have to slide the X rod that goes through the head slightly to the left.  Maybe only 4mm.  Slide it so it hits the wall and then back off at least 1mm.

 

Check the X switch also when the head moves to the left.

Share this post


Link to post
Share on other sites
Posted · HELP! UM3E with big errors (PrintCore taking too long to warm up and XY switches)
On 12/7/2018 at 8:53 PM, gr5 said:

I think these are unrelated.

 

The "too long to warm" issue is probably the head cable as you say.  It's trivial to remove the rear two long screws in the head and pop off the rear of the head, reseat the connector, push a little cable in as you put the cover back on (and add some tape as a shim) and re-insert the two long screws.  Takes about a minute.

 

The switches are unrelated to the head.  Push the head around and listen for "clicks".  Then look to see what makes the click.  Sometimes the X rod isn't hitting the Y limit switch when you push it to the rear - X rod needs to stick out a bit to the left to hit that switch.  You might simply have to slide the X rod that goes through the head slightly to the left.  Maybe only 4mm.  Slide it so it hits the wall and then back off at least 1mm.

 

Check the X switch also when the head moves to the left.

 

Thank you gr5! 

I've did as told, and put new long print . We will see if the problems are solved 🙂

I've checked the switches but they seem ok.... 

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 96 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!