Jump to content
fecht

Log of hot end power consumption vs. time after a print has completed

Recommended Posts

Posted · Log of hot end power consumption vs. time after a print has completed

Hi all,

 

I'm wondering if there's a way to output the hot end power consumption data after a print has completed. I'm assuming that as the extrusion rate changes throughout the print, so must the power used by the hot end to melt the plastic. My thinking is that if the hot end is held at a constant temperature, then a higher extrusion rate would correlate to more plastic that needs to be melted and more power consumed by the heating element of the hot end. 

 

And/or is there a way to output the hot end temperature vs. time and extrusion rate vs. time after the print has completed? Then I could hopefully correlate dips in temperature to increases in extrusion rates.

 

I'm using an S5 and Cura 3.4.1.

 

 

Share this post


Link to post
Share on other sites
Posted · Log of hot end power consumption vs. time after a print has completed

Are you a programmer?  Are you familiar with web protocols?  If you go to the ip address of your S5 (or UM3) and then click on the temperature link it shows the power usage of both cores and the bed.  In a graph.  You can look at the javascript code and write your own code to capture the raw numbers and analyze it any way you want.

 

I'd love to see this data.  Especially if there is a failure of some sort.  I'm wondering if it's possible to determine that you have a nozzle clog due to the power usage (I know the filament sensor detects this also but maybe for the UM3?)

Share this post


Link to post
Share on other sites
Posted · Log of hot end power consumption vs. time after a print has completed

I was really hoping for a plug-in, but thanks for the info. I'm not a programmer or familiar with web protocols, so it might take me a while to grab the data. (I'm a materials/mechanical engineer, so I'll fumble my way through).

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 182 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!