Jump to content
Ultimaker Community of 3D Printing Experts

How to 3D print with reinforced engineering materials


Recommended Posts

Posted · How to 3D print with reinforced engineering materials

Hello!

 

Since more composite engineering materials are becoming available through Ultimaker Cura and the material alliances we're forming, Ultimaker is hosting a webinar where we explain how you can achieve and maintain a high print success rate using these new materials. Most of us have probably mastered the skill of printing PLA, but some of those new materials require more specific and challenging 3D print guidelines and understanding. 

 

Learn from Ultimaker's Product Manager of Materials and top chemical engineer Bart van As how you can take your 3D printing to that next level.

 

When?

On December 17 at 4pm CEST (10am EDT). 

 

Interested? 

Register here if you want to participate.

 

Got any questions? 

Feel free to post them below! We hope to see you there! 

  • Link to post
    Share on other sites
    Posted · How to 3D print with reinforced engineering materials

    I think it was green screen :)

     

    looked very cool!

  • Link to post
    Share on other sites
    Posted · How to 3D print with reinforced engineering materials

    But cool, like a spaceship command center 🙂 

  • Link to post
    Share on other sites
    Posted · How to 3D print with reinforced engineering materials

    Thanks! It was indeed a green screen. We're in the process of setting up a studio though, but we're not there yet 🙂

    Did you like the webinar? Was it useful for you?

  • Link to post
    Share on other sites
    Posted · How to 3D print with reinforced engineering materials

    I expected a little bit more details and I missed the "how to" of the title, but it was nice an had a very professional touch.

    I thought we will get some info about how to setup Cura, are there some settings which are important to switch on/off and so on. But on the other hand, that would not fit into 30 minutes, so maybe I had the wrong expectations. 

     

    But anyway, it was good and I am looking forward to the next webinar. 

  • Link to post
    Share on other sites
    Posted · How to 3D print with reinforced engineering materials
    15 minutes ago, Smithy said:

    I expected a little bit more details and I missed the "how to" of the title, but it was nice an had a very professional touch.

    I thought we will get some info about how to setup Cura, are there some settings which are important to switch on/off and so on. But on the other hand, that would not fit into 30 minutes, so maybe I had the wrong expectations. 

     

    But anyway, it was good and I am looking forward to the next webinar. 

    well said!

     

    I think the format, Presenter and interviewee worked very well. Both did an excelent job, and spoke clearly which is so important! I couldn't really see the reason for the Owens Corning video which must have been at least 25% of the allotted time, i would have preferred more QA, and a link to the video to watch after. I dont really see the point of any pre-recorded content at all in a webinar... Thats what youtube is for. I think anybody who is committed to watching a webinar at a specific time is likely a professional user looking for more detail and more complexity from the format in general. I cant say i really learned anything new today, but i guess it was nice to have the summary of my research confirmed.

     

    That said, i did enjoy it and i'll definitely tune in for the next one!

  • Link to post
    Share on other sites
    Posted · How to 3D print with reinforced engineering materials

    Thanks for the feedback guys! Much appreciated. I will pass it along and we'll keep it in mind for the next webinar. 

    If you have any questions which weren't answered or perhaps you didn't ask, please post them here and we'll get them answered 🙂

  • Link to post
    Share on other sites
    Posted (edited) · How to 3D print with reinforced engineering materials

    Sander, some remarks.

     

    Regarding the content:

    - Don't think i learned something new, it was all very general, i felt it was a S5 sales talk. But i am around here a lot, so maybe i am not the right audience.

    -Hoped for some tips, but all was very general, ofcourse it was only 30 minutes, i was designing a part while following the conversations.

     

     

     

     

    Edited by RudydG
  • Link to post
    Share on other sites
    Posted · How to 3D print with reinforced engineering materials

    That's great very interesting.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Startups, apply for the Forward AM Innovation Award!
        Are you a startup using 3D printing? Perhaps you should continue reading... 
         
        Together with BASF we are launching the Forward AM Innovation Award - the very first global contest for startups developing new applications with 3D printing!
         
        Why apply?
        The winning startup will receive €100,000 in goods and services*, along with coaching and marketing exposure from top-notch leaders in the industry.
         

         
        Who can apply?
        Your startup creates products using Additive Manufacturing, is less than 5 years old, and has less than 50 employees. We are looking for 3D printing applications with a strong focus on innovation, sustainability and scalability.
         
        Dental aligners, shoes, tools, automotive parts, music instruments, industrial tooling and molding, medical implants, sports equipment, toys, architecture, fashion, construction... all are welcome to join!
         
        Do you have an innovative, sustainable and scalable idea that leverages the unique possibilities of 3D printing? Then it is time to apply!
        More information can be found here.
         
        Applications close on March 28th, 2021
        * What does "in goods and services" mean?
        The winner will be able to pick any item from the overall product and service portfolio of the sponsors, e.g. printers, materials, consulting, software... Choose whatever you need to accelerate your startup.
         
          • Like
        • 0 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...