Jump to content
Ultimaker Community of 3D Printing Experts

Cannot print thin walls


Luke67
 Share

Recommended Posts

Posted · Cannot print thin walls

I am currently stuck on another project. I have designed my piece in Inkscape and exported as an svg into Fusion. When I am done the wall thickness is about .2 in the model. When I slice it, it does not want to print it because it is too thin. I cannot create an offset in Fusion because of the complexity of the line. Each time I attempt it the program crashes or loads forever. Is there some way I can tell Cura to just print the wall at .4 instead of redesigning my entire piece?

  • Link to post
    Share on other sites

    Posted · Cannot print thin walls

    You can set "horizontal expansion" to 0.3mm to get all the walls up to 0.8.  But it will make everything 0.3mm thicker.  Anyway this is the simplest solution I can think of.  I recommend at least 0.8mm walls.  If you want to go thinner - say 0.6mm walls then you will need to enable "print thin walls".

    • Thanks 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...