Jump to content

The best software for beginners


Recommended Posts

Posted · The best software for beginners

It depends what you want to design, but for technical designs, no sculptures, I highly recommend Fusion360. It is free for personal use and there are great tutorials and videos available to learn everything from scratch - it is not hard or difficult.

 

I would avoid "easier" solutions like thinkercad, because you struggle with the basics there, put a lot of time there to design something and if you want to make something more sophisticated, then thinkercad is not able to do that.

  • Link to post
    Share on other sites

    Posted · The best software for beginners

    Definitely *avoid* SketchUp: it will cause nothing but problems, because its models are not watertight: they are no solids, but sort of "cardboard models" with gaps in the seams.

     

    I use DesignSpark Mechanical, a freeware limited version of the commercial SpaceClaim. For my technical models this is good enough. On Youtube you also find good tutorials for this. Go to the DesignSparkRS channel and scroll down to 3 and 4 years ago. It is easy to learn too. Not suitable for organic models or photorealistic rendering.

     

    It depends a lot on your personal taste and requirements. I would recommend you take a look at demos of several programs, and choose the one you like most.

     

    ostroncp_v20170104c.thumb.jpg.6dae46fd9b48b292823335415abefbf4.jpg

     

    ostroncp_cutout1.thumb.jpg.60e7c999bc0d7ff65fe245ac679b4dcb.jpg

     

     

    • Like 1
    Link to post
    Share on other sites

    • 3 weeks later...
    • 1 month later...
    Posted (edited) · The best software for beginners

    Do not be 'sniffy' about, or underestimate the power of Tinkercad, especially for technical models. I have used it exclusively for over 4 years to design over 200 objects of varying complexity without needing to find an alternative. It is often dismissed as being too basic to be of any serious use, but this must surely be the opinion of those that have never really tried to use it. It is bristling with features that soon become apparent when using it.

     

    The learning curve is short and very easy and ideal for newcomers and seasoned users alike. Above all, it is highly intuitive.

     

    As an engineer myself, I thoroughly recommend using this software.

     

    Here is an example of a recent (two-piece) design I created to remove the stones from plums and slice them into 3 pieces ready for jam making. This is by no means the most intricate thing I have produced.

     

    PlumStoner.jpg.0ab482de9d12137abb8a1707ebf09dbe.jpg

    Edited by vitalsparks
    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing Universal Cura Projects in the UltiMaker Cura 5.7 beta
        Strap in for the first Cura release of 2024! This 5.7 beta release brings new material profiles as well as cloud printing for Method series printers, and introduces a powerful new way of sharing print settings using printer-agnostic project files! Also, if you want to download the cute dinosaur card holder featured below, it was specially designed for this release and can be found on Thingiverse! 
          • Like
        • 10 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    ×
    ×
    • Create New...