Jump to content
Ultimaker Community of 3D Printing Experts

Cannot get infill to print after doing Vase, surface, spiralize prints


EdwardMNC
 Share

Recommended Posts

Posted · Cannot get infill to print after doing Vase, surface, spiralize prints

I printed some vase type things a few weeks ago for the first time and now cura 3.6 seems to ignore that I have turned off smooth spiralized contours and surface mode to normal or both.  when I import a design it shows up with no top or infill unless I set the infill to 100% then it looks solid.  thanks for any adice you can provide!

Edward

  • Link to post
    Share on other sites

    Posted · Cannot get infill to print after doing Vase, surface, spiralize prints

    there should be a profile drop down where you can choose for example "Draft 0.2".  There should be a star there.  Click that start.  This shows you all the deviations from the standard profile.  Look for settings and values in italics in the lower right corner of that dialog.  Make sure you click both the "global settings" tab at the top of that table and the "extruder" tab(s).  Look carefully at all the settings you have changed that are different from the standard settings.  All the ones that are italic in the current column are modified.

  • Link to post
    Share on other sites

    Posted · Cannot get infill to print after doing Vase, surface, spiralize prints

    yep that's what it was!  thank you!  I was surprised I couldn't use a profile that had spiralize and then turn that off for the model I'm working on.  Now I know!

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...