Jump to content
Ultimaker Community of 3D Printing Experts
Nenohecho

UM3 extend, After an autolevel the nozzle is to high

Recommended Posts

Hi,

 

what do you mean by "too high"?

Is your first layer not on the build plate? Was the autoleveling successful? Is this for both nozzles or just for one?

 

Just one idea, which made me some problems. Is your model really on the build plate in your slicer or is the z height incorrect. I disabled the function "Automatically drop models to the build plate" in Cura once for some reason and forgot to turn it on again, so some models where some millimeter off the build plate.

 

What you can do else is to manually level your build plate. 

 

Best regards

Share this post


Link to post
Share on other sites

Hi,

"what do you mean by "too high"?"
distance beetwin nozzle and glass is to big. approximately 0.2 mm

 

"Is your first layer not on the build plate?"
the first layer is on le build plate

 

"Was the autoleveling successful?"
Yes

 

"Is this for both nozzles or just for one?"
both


"Just one idea, which made me some problems. Is your model really on the build plate in your slicer or is the z height incorrect.I disabled the function "Automatically drop models to the build plate" in Cura once for some reason and forgot to turn it on again, so some models where some millimeter off the build plate."
 

The model is on right position  on slicer.

 

"What you can do else is to manually level your build plate." 
I know, but i try to work with "auto level" fuction

 

Thank you


Best regards

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Ultimaker Cura | a new interface
      We're not only trying to always make Ultimaker Cura better with the usual new features and improvements we build, but we're also trying to make it more pleasant to operate. The interface was the focus for the upcoming release, from which we would already like to present you the first glance. 
        • Like
      • 122 replies
    • "Back To The Future" using Generative Design & Investment Casting
      Designing for light-weight parts is becoming more important, and I’m a firm believer in the need to produce lighter weight, less over-engineered parts for the future. This is for sustainability reasons because we need to be using less raw materials and, in things like transportation, it impacts the energy usage of the product during it’s service life.
        • Like
      • 12 replies
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!