Jump to content
Ultimaker Community of 3D Printing Experts

Undesired "stringing" commands in the gcode


jep1955
 Share

Recommended Posts

Posted · Undesired "stringing" commands in the gcode

So.  Visualize a square box with a hole in the middle.  When I print the part (Created in CURA), it prints material from the outer square boundary to the inner circle boundary.

 

The head does not lift.

The filament does not retract.

 

I get a lot of this.  I'd rather have it print the outer boundary (box), lift (and pull back the filament), move to the circle, drop, restore filament, and print the to objects isolated from each other.  Z hop and all that kind of stuff does not seem to fix this.  The printer connection seems to be intentional for some reason.

 

I should note that if I print two separate parts it does *not* do this between parts.  Just isolated features on the same part.

  • Link to post
    Share on other sites

    Posted · Undesired "stringing" commands in the gcode

    Well the answer is to turn off combing mode off.  This should enable retractions even "inside" the part.

     

    First note that your cad model specifies that the space between the box and hole should be solid.  So you might want to change the cad model instead.

     

    So the reason you get this string on each layer is because cura doesn't retract.  It's trying to save time since normally people don't mind if there is a little stringing inside their part where no one can see anyway.  When retractions are turned off the nozzle keeps extruding.

     

    There are 2 kinds of "non printing" moves: retraction and non-retracting.  They are different shades of blue in the layer view.  Make sure you see the moves change color in layer view to be sure that disabling combing will do what you want.  No need to actually waste another print if I'm wrong about combing.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 8 replies
    ×
    ×
    • Create New...