[[Template core/front/global/favico is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] Jump to content
Ultimaker Community of 3D Printing Experts

A setting to slow down around vertical text?


Recommended Posts

Posted · A setting to slow down around vertical text?

Hi guys, does anybody know of a setting that will slow the printer speed down around a selected area? I have a ton of parts that I need to print so im trying to keep my speeds higher but there is some extruded text along a wall (see photo), my high speed prints are coming out perfect except for the text. Stock settings with CURA and though PLA on the UM3 are having this part come out at 2.5hours and the text is clear, Ive got the print down to 1H19min and the part is stronger than ever! But I can hardly read the text when I print this fast since the machine is not that rigid. Any input would be appreciated!

 fullsizeoutput_ae2.thumb.jpeg.5e1277b2a83989bfb5df08faa7d0cdd6.jpeg

  • Link to post
    Share on other sites
    Posted · A setting to slow down around vertical text?
    2 minutes ago, JohnInOttawa said:

    Without knowing anything about your part geometry, is there any possibility of rotating it so the text is facing upward, then going with variable layer height?

     

    John

    Thanks for the response, unfortunately the text has to stay the way it is. These are thin wall tubes. not too many flat surfaces to work with. 

  • Link to post
    Share on other sites
    Posted · A setting to slow down around vertical text?

    You can try if you can achieve it with the "per model settings" in the left menu. Make a cube in your CAD software and put this cube to the build plate too. Move the cube to overlap the text or the area you want to change. Then select the cube and click on the pet model settings. There you have a lot of options to modify the print settings in the area the cube overlaps with your model.

     

    I am not sure if you can change the print speeds but you should be able to change the layer height. But check it, there are a lot of possibilities.

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    ×
    ×
    • Create New...