Jump to content
Ultimaker Community of 3D Printing Experts

To create mold for concrete using PLA


Fazil Marakkat
 Share

Recommended Posts

Posted · To create mold for concrete using PLA
5 hours ago, Fazil Marakkat said:

but I have concern with the cast removal, do you know any lubricants to be used?

you should find a release agent to separate the concrete to the mold...

  • Link to post
    Share on other sites

    Posted · To create mold for concrete using PLA

    You need to make sure you have no undercuts, and that all side walls have draft (=wider opening at the top). Otherwise the models get stuck.

     

    If in doubt, make the walls out of multiple parts, and provide strong flanges with holes to screw them together.

     

    Provide big openings for pouring in the liquid, and openings for venting air. Make sure no air can get trapped.

     

    Weight could also be a problem in big models: make the walls thick enough, and provide extra supports where required (like the beams on the sides of castles and cathedrals).

     

    And heat development: I don't know how hot concrete gets, but gypsum gets warm and could melt PLA moulds.

     

    For release agents, you will have to google. Not only do you need to find one that works well in combination with concrete, but it also should not inhibit the curing. Try on small test pieces first. Silicon oil might work.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • The Ultimaker Showcase — October 14. What's new?
        Your dear friends at Ultimaker have some exciting news and insights for you!
         
        • 0 replies
      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 10 replies
    ×
    ×
    • Create New...