Jump to content
Eug

printer restart on its own

Recommended Posts

Posted (edited) · printer restart on its own

printer Ultimaker 2+ Extended, PLA 2.85mm

after I start a printing, usually I set the nozzle temperature around 195°C.

it happened several times now, while I was doing the setting, the printer restart on its own.

did anybody see this problem?

Edited by Eug

Share this post


Link to post
Share on other sites
Posted · printer restart on its own

This is a common problem. It's almost always the power brick.  If the brick senses that you used too much power it shuts off.  But only for about 1/4 second and then power comes back on.  This appears to be a plain old reboot but is really a power off/on very fast.

 

If this printer is less than a year old I would try to get a free one from your supplier.  If not you can just buy the power brick.

 

Until you get the new brick you can avoid using the bed and instead use a cold bed and blue tape washed with isopropyl alcohol.  Your printer should have come with blue tape for this purpose.

 

Alternatively you can use the power budget feature in tinker marlin which is a fantastic alternative firmware for um2+ extended.  You can download it here (you want the 5th one down of course):

https://github.com/TinkerGnome/Ultimaker2Marlin/releases/

 

Go into power budget.  I believe for normal printer you want:

budget 180W

bed 150W

nozzle 30W

 

With the above settings the budget will never limit power.  so then you just lower the budget a bit:

budget 160W

bed 150W

nozzle 30W

 

That should be plenty to avoid tripping the power brick.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Like
      • 45 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!