Jump to content
Ultimaker Community of 3D Printing Experts

Position of stl file in cura


Recommended Posts

Posted · Position of stl file in cura

 

Is there any possibility that cura places my imported stl file not in the geometric centre of my part but with the same origin/ coordinate system as it has in my cad design (fusion 360)?

Thank you for your help!!

  • Link to post
    Share on other sites
    Posted · Position of stl file in cura

    The problem is that I have one body which I spilt into two parts. I print the first part of the body. Then I want the second part printed at a certain place. In my cad design it's on the right position, but when I open it with cura it's centred in the middle of the build plate. 

     

    I've already tried to align it manually and measure the distance of the different origins with my cad software but it's never exactly at the point where I want the second part to be printed.

     

  • Link to post
    Share on other sites
    Posted · Position of stl file in cura

    I am having the same exact problem.

    I use SolidWorks and I have an assembly with multiple parts positioned correctly in the CAD but when I import the files into cura the parts when combine are in a different place.

    Did you manage to find a solution?

    Please help 🙂

  • Link to post
    Share on other sites
    Posted · Position of stl file in cura

    Unfortunately not. I'm still trying to measure with my cad software. I also tried other slicers to find out if one is capable of measuring or to find the same position like in the orignal draw. But nothing out there 😕

  • Link to post
    Share on other sites
    Posted · Position of stl file in cura

    Hi Thank you for your reply.

    I have changed my model in SolidWorks so that all the bodies are now connected.

    maybe you can do the same with your model.

    There is a bit of more cad work to do but it seams to work for me.

    See file attached.

    Let me know what you think.

     

    STEVE BIRTHDAY.zip

  • Link to post
    Share on other sites
    Posted · Position of stl file in cura

    Hey! Thank you for sharing your solution.

    I'm not sure if that will work out for me, as I have a complete part in the beginning and I split it into 2 single pieces on purpose. After the first part is printed I want to rotate the build plate and then continue printing with the second part (to avoid support material).

    But I'm happy to hear that you found a way to print your part! 🙂

  • Link to post
    Share on other sites
    Posted · Position of stl file in cura

    I’m having the same issue. Too bad the topic hasn’t received more attention. Have you had luck in any other forums?

    It would be great to have an option to turn off auto centering and just allow the data to be located relative to it’s CAD export position. 

  • Link to post
    Share on other sites
    Posted · Position of stl file in cura

    Maybe you could do it with a trick? Put four tiny dots outside of each corner of your models. So that they form an imaginary rectangle that encloses your design. Or draw a custom skirt around your design; just one layer height is sufficient. Then that surrounding skirt or border should always be placed in the same position on an empty bed. Keep that skirt, or those four dots, in place, and then correctly place the rest of your components in this space, and save as separate files. When slicing, the skirt (or the four dots) should determine the position on the glass. At least, that is what I would expect. Try this with a small test piece first, before wasting too much material on a real big model.

     

  • Link to post
    Share on other sites
    Posted · Position of stl file in cura

    I found a solution. Prusa slicer has an option to split up multiple bodies that come in as one stl file. Bringing them in as a single stl keeps them located relative to the CAD export orientation. After splitting they show up as a sub-assembly on the right information window. At that point you can edit the components you don’t want to print by calling them support blockers. Then switch the settings for the second run.
    It’s a great way to keep components correctly located relative to each other but print separately. 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Ultimaker Transformation Summit

        On April 20 - April 23 we will host the Ultimaker Transformation Summit. Come talk to us via Live chat and get inspired by any of our relevant presentations!
        • 10 replies
      • New here? Register your Ultimaker for free 3D printer onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 0 replies
    ×
    ×
    • Create New...