Jump to content
JungleProphet

Missing top/bottom skin

Recommended Posts

Posted (edited) · Missing top/bottom skin

CCR10_Half_axle_short.gcode

*************************************

*NEVERMIND                          *

*I think what I'm seeing is normal. *

*************************************

Using Cura 4.0.0 on Windows 10 64-bit

I'm a rank newbie.

When I'm slicing my models using Cura, it doesn't seem to generate any top or bottom skin layers.

I'm left with inner wall at the top and bottom.

Shell thicknesses seem to work fine.

I've attached a sample .stl file.

Slicing with any of the default profiles (fine, draft, etc) reproduces this.

I'm not sure what to try next.

Any suggestions please?

Half_axle_short.stl

CCR10_Half_axle_short.zip

Edited by JungleProphet
Decided there is really nothing wrong. I just misunderstood the display.

Share this post


Link to post
Share on other sites
Posted (edited) · Missing top/bottom skin

image.png.dcbe9f211636dec495050d1533f5763e.png

Here's an image of the final top layer.

Also, based on some other questions in the forum where the target printer was non UM, I tried targeting an UM S5 and got the same result.

FWIW, this is targeting a Creality Ender-3.

 

So, in this image, I would expect to see a red layer atop the main cylinder, as well as across the rectangular tab.

But both parts are left as raw wall or infill.

Edited by JungleProphet
Better description of what I expect to see in this image.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 98 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!