Jump to content
Ultimaker Community of 3D Printing Experts

Left side of prints vs right side and flow rate?


Tesla760
 Share

Recommended Posts

Posted · Left side of prints vs right side and flow rate?

Hello, on my prints I've noticed left side of my skirt has gaps until i Z hop the Z axis to get lines  to join together.

The right side i can Z hop .75 but still get gaps on the left, I have to Z hop to .125. I heard increasing flow rate will work. When increasing flow rate will that increase the skirt flow rate as well as m actual print ?

.4 nozzle, PLA, 205 nozzle temp, 65 bed temp.



right.thumb.jpg.704f1a6a67de367be2e17d7bcbfcee83.jpgleft.thumb.jpg.3209b246e4e98beb4a77e261188f527a.jpg

  • Link to post
    Share on other sites

    Posted · Left side of prints vs right side and flow rate?

    Hi, from what you are saying, as I interpret it, your bed is not level i.e. there is a bigger bed to nozzle distance on the left so the filament is not getting sqished into the bed. Best solution is to get it level! Also I assume your bed is nice and clean all over.

     

    Yes increasing the flow rate will affect the whole print unless you using print control software , e.g. RepetierHost, that allows you to modify flow in real time. I do that all the time using 70% flow for the first layer then transitioning to 100%.

     

    I have no idea if the latest version of Cura has this capability.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...