Jump to content
smalkasian

3D Prints Keep Messing Up

Recommended Posts

Posted · 3D Prints Keep Messing Up

Every item I print turns out this way (see photos). I have tried adjusting temps (doing that right now) and cleaning the tip, but maybe I'm still missing something? All of my prints turn out very brittle and crackly. Just very poor quality. I have the PLA in a dehydrator keeping it warm and dry. 

 

Any thoughts or help? I am new to the 3D printing community so any explanation or advice is greatly appreciated!

 

Thank you so much! 

IMG_2285.jpg

Share this post


Link to post
Share on other sites
Posted · 3D Prints Keep Messing Up

This looks like severe underextrusion, which could be caused by a lot of factors: too low temperature, partially clogged nozzle, worn-out teflon couplers, incorrectly mounted bowden tube, dirty feeder, slipping feeder due to wrong tension, too high speed, wrong filament diameter or setting, too much friction in the whole feeding traject, spool wound too tight (often when almost empty), material decomposing in the nozzle, way too moist, and so on.

 

Somewhere on this forum there is a good list of causes (but I don't remember the name exactly), or google for underextrusion causes on the internet.

 

I made tests some time ago, and yours looks like an extrusion-rate of maybe 50%? (Pictures are a bit out of focus due to taken on a dark winterday, but you get the idea).

 

DSCN5958.thumb.JPG.f972ac1f60bcccd9f458f7e72e733214.JPG

 

DSCN5959.thumb.JPG.873a128c74ffe775d0c8618a9184ce43.JPG

 

DSCN5960.thumb.JPG.d4d915f17487566fb9441e5e3513bbaf.JPG

 

DSCN5962.thumb.JPG.f555322f8bebd98812c9252f4d08b7ee.JPG

 

DSCN5963.thumb.JPG.dd9d9b82c6e24094349994fc00d2a202.JPG

 

DSCN5965.thumb.JPG.861a898e68a1b729b52c504c05f7a7d1.JPG

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Our picks

    • Ultimaker Cura 4.0 | Stable available!
      Ultimaker Cura 4.0 is mainly focused on the improved user interface and cloud integration.
      As always, we want to collect your user feedback for this release. If there are any improvements you can think of, feel free to mention it here and help us to shape the next release.
      • 96 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!