Jump to content
Carla_Birch

Ultimaker S5 cover with HEPA filter

Recommended Posts

Posted · Ultimaker S5 cover with HEPA filter

there was one reviewed recently on the youtube channel of the 3d printing nerd at a recent 3d printing show.

 

Share this post


Link to post
Share on other sites
Posted · Ultimaker S5 cover with HEPA filter

i have the Accante one. does the job!

 

its a little tricky to assemble but once its made it looks great and its completely transparent which makes monitoring prints a breeze. there's a door in the front/top so you can maintain the head without taking it off. 

Share this post


Link to post
Share on other sites
Posted · Ultimaker S5 cover with HEPA filter
On ‎6‎/‎7‎/‎2019 at 3:44 PM, ScanHD said:

i have the Accante one. does the job!

 

its a little tricky to assemble but once its made it looks great and its completely transparent which makes monitoring prints a breeze. there's a door in the front/top so you can maintain the head without taking it off. 

 

I agree.  The Accante cover works very well.  The filtered hot air also remains in the build chamber, reducing the chance of a draft.  If you have a cover and it vents to the exterior the air will be replaced by cold outside air.  

 

The door is also a nice feature.  I have another cover that is not clear and does not have the door, and it is a pain.

Share this post


Link to post
Share on other sites
Posted · Ultimaker S5 cover with HEPA filter

Just bought one of these on the basis of your several comments. It's good.

 

The assembly instructions take a bit of following but do work, and everything fits very accurately - impressive.

 

I'm using a number of awkward materials and hadn't appreciated how much an enclosure assists with keeping ambient conditions stable. Well worth the money.

 

Thank you, gentlefolk.

 

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Thanks
      • 46 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!