Jump to content
Ultimaker Community of 3D Printing Experts

Printing multi color with same hotend on same layer height


nmaas87
 Share

Recommended Posts

Posted · Printing multi color with same hotend on same layer height

Dear all,

 

I need to create a flat badge where I want to create the "key symbol" in one color and the surrounding area in another, on the same layer height.

I know that it is quite easy with cura to stop printing at a certain layer height to swap filament, but this is not possible here.

Does anyone know how to achieve this?

I think you'll need to print the main symbol first in one colour, than swap the filament and then let it "embeed" the outerframe around the previous printed.

The key smbol should not be that high, only some layers thick, so that it should not really collide with the nozzle or pose any particular problems on that side.

 

Thank you very much for your help 😉

  • Link to post
    Share on other sites

    Posted · Printing multi color with same hotend on same layer height

    Quite some time ago this has been discussed on this forum, with lots of photos. But I don't know the topic name. Maybe you can find it back?

     

    They did this by first printing one layer ("the symbol"), in a thin layer height (e.g. 0.1mm). And then, using a thicker layer height (e.g. 0.3mm), they printed the next part over the first, without removing that model from the build plate. But I don't remember the details.

     

    Some people got really nice results.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 11 replies
    ×
    ×
    • Create New...