Jump to content
Ultimaker Community of 3D Printing Experts

Weird unnecesary travel


salomon
 Share

Recommended Posts

Posted · Weird unnecesary travel

Hi,

I made test object and I`m facing weird travel moves that are not even marked in cura as travel. best to see a video

this is in cura 4,tried all combing setting, cura4.1 is even worse.

 

vase mode solve the problem but not alway is possible to use vase mode.

 

thanks for help

  • Link to post
    Share on other sites

    Posted · Weird unnecesary travel

    Hello @salomon, make sure the wall overlap compensation is turned on and set the Minimum Wall Flow to something like 30 or maybe greater and it should only make one pass over that wall. Hope this helps.

  • Link to post
    Share on other sites

    Posted · Weird unnecesary travel

    Minimum wall flow setting solve the problem Thanks a lot.

    I have additional question: why it did the second run over the print with 0 flow? is it because of design of the shape?

  • Link to post
    Share on other sites

    Posted · Weird unnecesary travel
    3 hours ago, salomon said:

    Minimum wall flow setting solve the problem Thanks a lot.

    I have additional question: why it did the second run over the print with 0 flow? is it because of design of the shape? 

     

    Cura always prints non-thin walls as a pair of lines, the inside and outside edges of the wall outline. Thin walls are handled differently.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share

    • Our picks

      • New here? Get ahead with a free onboarding course
        Hi,
         
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
        • 11 replies
    ×
    ×
    • Create New...